No products in the cart.

  • IMG_1773-copy-Large-2-copy
  • IMG_1774-copy-Large-copy
  • IMG_1778-copy-Large-copy
  • IMG_1782-copy-Large-copy
  • IMG_1792-copy-Large-copy
  • IMG_1777-copy-Large-copy
  • OLYMPUS DIGITAL CAMERA
  • Ring
  • Ring
  • Zheng3 Snake Token
  • IMG_2806 (Custom)
  • IMG_2820 (Custom)
  • IMG_2793 (Custom)
  • IMG_1773-copy-Large-2-copy
  • IMG_1774-copy-Large-copy
  • IMG_1778-copy-Large-copy
  • IMG_1782-copy-Large-copy
  • IMG_1792-copy-Large-copy
  • IMG_1777-copy-Large-copy
  • OLYMPUS DIGITAL CAMERA
  • Ring
  • Ring
  • Zheng3 Snake Token
  • IMG_2806 (Custom)
  • IMG_2820 (Custom)
  • IMG_2793 (Custom)

mUVe 1 Laser 3D Printer

0 reviews
0 out of 5

From: $1,499.00

Clear

Easier to use and calibrate, less expensive to run, and less maintenance!

Aluminum Case Full and Ultimate Kits available for those who want to get printing right away and want a sleek and durable case to house their machine.
  • icon

    Safe-to-Travel Stronger Case

    The new stronger case means you can move your printer around and travel with relative ease, and without worry of damage. Bring your machine along and it’ll still be calibrated when you get there.

  • icon

    Completely Detach from a PC

    The LCD based controller features a jog dial and buttons to allow for printer setup and starting of prints as well as a tiny piezo. While printing it shows information about the laser as well as status of the print and location of each axis. You can even speed up and slow down printing on the fly, make changes to core parameters such as acceleration and steps per mm, test fire the laser, or move any axis. It also features a full sized SD Card slot so you can print completely detached from a PC.

  • icon

    Just Flip The Switch!

    One of our favorite features is the addition of a power switch, this will allow you to test and setup your printer with relative ease. No longer will you have to keep you hand on the power cord ready to unplug, just flip the switch if something goes wrong.

  • icon

    Less Maintenance, Easier Access

    Possibly the best change, is the ease at which you will be able to work on your machine. Once it is connected to the case you simple need remove any side panel with the 4 attachment screws to access the internals. You can even flip the machine upside-down!

The Aluminum case kits come with a LCD controller that will allow you to print completely without a PC. They also feature panel mount power and USB connectors and an included 4GB SD card to hold all your prints! It even has a power switch! The Aluminum case Ultimate kit is a great deal and comes with everything you need to get printing and stay printing, we even give you an extra laser that is 3x the power at 150mW so you can experiment with all kinds of resins.

  • No extruder heater cores to burn out or extruder insulators that melt and are irreparable. Only a long lasting laser diode, and they can easily be replaced!
  • No fans to cool sagging extruded plastic during your prints or keep extruder parts from melting. Just 1 fan to cool the motor drivers.
  • No tedious Z-axis leveling process. The glass reservoir is flat and the frame is very square.
  • Because of the upside-down approach to printing there is much less restriction for overhangs and high sloping angles on your parts.
  • The adjustable size of the laser allows changing laser point size. No more buying extruder nozzles to change extrusion or filament size, just adjust the iris, measure the output and go!
  • Standard Open Source Tool-Chain – 3D Model ->Repetier Host ->3D Printed Object.
  • Make your own resin colors or use pre-mixed and colored resins! Finally you can make the exact color you need. Pigments and resins available at MakerJuice.com
  • It’s Fast. Printing hi-resoultion takes a long time so we move at up to 600mm/s with 4000mm/s+ acceleration rates. That is about 5 times faster than most current top of the line FFF printers. Current average speed with MakerJuice Resin is about 300mm/s.
  • Replacement Parts are Easily Sourced and are Inexpensive.
  • No part costs more than $25 to make or replace, other than the reservoir at around $50 pre-assembled with non-stick surface. The Iris Diaphragm is a bit over $40 but is still considered optional, yet highly recommended. The 1/4″ glass should last indefinitely, the non-stick coat can be replaced for $4-8 depending on your choice.
  • Using 8mm linear motion means there are literally hundreds, if not thousands, of suppliers for parts worldwide.
  • MicroRax is highly popular and established and can support a large audience. It is also very inexpensive and parts can be purchased individually so there’s no need to buy more than you need to replace.
WEIGHT  38 lbs
DIMENSIONS  18 x 14 x 6 in
KIT STYLE  Full Kit, Ultimate Kit
  • MicroRax Aluminum Extrusion frame
  • 8mm coated aluminum linear rods and Igus bearings
  • Small parts ship in an divided snap-lock container
  • 145mm x 145mm x 185mm X,Y,Z build space
  • Outside dimensions 362mm x 360mm x 460mm
  • RAMPS 1.4 Electronics with SD RAMPS
  • 12V 5A PSU switchable 120V/240V AC
  • Laser Iris Diaphragm allows scalable resolution, .1mm standard supported resolution
  • Laser upgradable up to 500mW with current laser driver
  • Replaceable PTFE non-stick tape coating or QSil Silicone Elastomer
  • Low-Iron Glass Reservoir, extremely clear
  • Custom Marlin Firmware with active development
  • Includes at least 1 bottle of MakerJuice SubSF to get you started

*Kits require assembly, pre-sale kit orders are final.*

Aluminum Case Full

Includes Everything You Need to Start Printing
$1,499.00
  • mUVe 1 Chassis with Alum. Case
  • Printer Electronics w/ Wiring & Motors
  • LCD Controller with 2GB SD Card
  • 50mW Laser System
  • Glass Reservoir with Coating (QSIL Kit & FEP Tape)
  • 3D Printed Parts
  • 500mL SubSF Red Resin
  • Hex Wrenches for Assembly

Aluminum Case Ultimate

Includes Everything You Need to Start Printing
$1,699.00
  • mUVe 1 Chassis with Alum. Case
  • Printer Electronics w/ Wiring & Motors
  • LCD Controller with 2GB SD Card
  • 50mW Laser System + Extra 150mW Laser!
  • Glass Reservoir with Coating (QSIL Kit & FEP Tape)
  • 3D Printed Parts
  • 2L SubSF Red Resin
  • Hex Wrenches for Assembly
  • iFixit 54 Piece Tool Kit for Assembly
  • UV Oven to Post-Cure Prints
  • Part Rinsing Container
  • Spatula/Printed Part Remover
  • Syringe to Easily Empty Your Reservoir