No products in the cart.

  • pre-built muve 3d dlp 3d printer
  • TM_img_6745_1_retouchedKO
  • TM_img_6797_retouched
  • UberZLarge
  • IMG_1053_ed
  • Cameron_Rings
  • IMG_2856_Small
  • IMG_2852_Small
  • pre-built muve 3d dlp 3d printer
  • TM_img_6745_1_retouchedKO
  • TM_img_6797_retouched
  • UberZLarge
  • IMG_1053_ed
  • Cameron_Rings
  • IMG_2856_Small
  • IMG_2852_Small

mUVe 3D DLP Maker and ULTIPro+

0 reviews
0 out of 5

From: $999.00

Clear
  • DLP Maker and Maker X Kits
The DLP Maker and Maker X are both DIY printers that you build yourself. Save yourself a ton of money, roll up your sleeves, and become a super maker! Getting the hands-on time with your machine will make you that much more capable in manipulating your printer into ultra-high resolution 3D printing bliss! Both printers come complete, but the Maker X comes with all the extras to include your Raspberry Pi 3 with nanoDLP preloaded as well as a Projector and 500mL bottle of resin!
  • DLP ULTIPro+ Pre-Assembled
The DLP ULTIPro is our top of the line pre-assembled 3D printer, ok 95% assembled. You’ll just be attaching the legs, projector mount and projector. Everything else has already been done for you in addition to getting a preloaded Raspberry Pi 3 with nanoDLP. You will be calibrated and printing within just a couple hours, but still have all the features of the Maker X and more! This is our only pre-assembled 3D printer that can hold the Large FlexVat and Build Plate, be sure to get them as well for extreme build areas!
  • Chassis

    Our tried and true dual motor peel system is part of every 3D printer we sell. Now we’re including the Uber Z axis for ultimate strength and longevity. The adjustable internal chassis system allows for mounting of a wide array of projectors and reservoir/build plate systems.

  • Electronics

    We have open source firmware to match our hardware. The electronics we use are still RAMPS 1.3-4 compatible and are the most popular design used today, even the newer single board controllers are RAMPS compatible. Add-ons and advanced control of external electronic devices are all but a few wires away.

    Maker – RPi 2or3, RAMPS or RPi Printer Electronics, Motors, and Projector Required

    Maker X – 1920×1080 Projector and Raspberry Pi 3 Included, Preloaded SD card with nanoDLP. Everything you need to start!

  • Specs

    -Build Area 175mm x 98.5mm x 250mm Z max with included reservoir and build plate. Optional Large FlexVat and build plate sold separately. Large Build Plate size 190mm x 270mm.

    -X/Y Resolution Adjustable ~25micron-150micron

    -1920 x 1080 pixel ViewSonic projector included with Maker X model only.

    -Raspberry Pi 3 with nanoDLP preloaded included with Maker X model only.

    -120-240VAC 50-60Hz approx 250W power consumption.

  • Chassis

    It’s our most up to date, always upgraded, always reliable chassis. Only pre-assembled by our experts. Our tried and true dual motor peel system is part of every 3D printer we sell. Now we’re including the Uber Z axis for ultimate strength and longevity. The adjustable internal chassis system allows for mounting of a wide array of projectors and reservoir/build plate systems.

  • Electronics

    We have open source firmware to match our hardware. The electronics we use are still RAMPS 1.3-4 compatible and are the most popular design used today, even the newer single board controllers are RAMPS compatible. Add-ons and advanced control of external electronic devices are all but a few wires away. We even include a shutter assembly! With this printer you’ll be getting a Raspberry Pi 3, setup software is as simple as plugging itto into your local PC network and discovering it using UPnP.

    Get an expanded build area with the UltiPro Max. With this pre-assembled system you’ll have the most versatile DLP printer on the market!

  • Specs

    -Build Area 175mm x 98.5mm x 250mm with standard reservoir and build plate. Optional Large FlexVat and build plate sold separately or standard with the UltiPro Max. Large Build Plate size 190mm x 270mm, max build area with a single projector 151.9mm x 190mm x 250mm @ 141microns X/Y.

    -X/Y Resolution Adjustable ~25micron-~150micron

    -1920 x 1080 pixel ViewSonic projector included.

    -Raspberry Pi 3 with nanoDLP preloaded included.

    -120-240VAC 50-60Hz approx 250W power consumption.

The best things in life don’t cost a thing! Use nanoDLP to control your DLP printer without the need for a second monitor output on your home computer. It’s the ultimate way to keep your PC from turning into the dreaded dedicated 3D printer controller. You can use the feature rich nanoDLP to control any of our available DLP printers!

-Mask Support

-Anti-Aliasing

-Pixel-Dimming

-Dynamic Print Speed

-Blackout During Prints

-STL, SVG, SLC, and PNG Support

-Custom Buttons

-Easy Upgrades

-UPnP Network Discovery

-Even a Cloud Dashboard to remotely monitor your printers!

Since our printers use standard electronics we have minimal restrictions on software usage. You can use nanoDLP on a Raspberry Pi 3 as a free way to run your printer, or even Creation Workshop if you want it connected directly to your PC. With so many options, you’ll have a ton of capability just a fingertip away.

Our DLP printers support a massive array of 3D printing resins. If you find a resin that says it’s DLP printing compatible, chances are it’ll print on our printers. We supply 500mL of premium MakerJuice resin with each printer. This resin is stiff but flexible enough to allow for snap-fit plastic parts and is really a good choice for any 3D printed parts you might have. If you for some reason find it’s not a good fit you should head over to makerjuice.com and check out their selection. Or you can check out some of the other resins in our store. Materials come in a huge range of offerings from rigid to flexible, castable and biocompatible, opaque to translucent, even clear. You’re sure to find exactly what you need.

All of our printers are documented and held on open, comment ready, public channels. We do our best to keep our documentation full of rich media with images and step-by-step instructions. If something’s missing just leave a comment and we’ll get it added right away!

With a dedicated support forum and direct email support, you’ll never be far from a helping hand. Our growing community is full of friendly helpful people, and we’re always there to help too! You’ll never find yourself stuck in a place we can’t help you get out of. It’s just part of what we do.

ViewSonic 1920×1080 PJD7820HD Projector Spectrum Output *Approximate*