Sold Out
  • 4KSQ-1600
  • 4kFront
  • 4kFrontLeft
  • 4kFrontRight
  • TM_img_6797_retouched
  • UberZLarge
  • IMG_1053_ed
  • Cameron_Rings
  • IMG_2856_Small
  • IMG_2852_Small

mUVe 3D DLP ULTIPro 4K Printer and Upgrade Kit

0 reviews
0 out of 5

From: $2,799.00

  • DLP ULTIPro 4K Pre-Assembled Printer and 4K Maker/ULTIPro Upgrade Kit
The DLP ULTIPro 4k is our top of the line 95% assembled 3D printer. You’ll just be attaching the legs, shelving, projector mount and projector. Everything else has already been done for you in addition to getting a preloaded Raspberry Pi 3 with nanoDLP setup with 4K output. You will be calibrated and printing within just a few hours, but still have all the features of the Maker X and more! This is our only pre-assembled 3D printer that can hold the Large FlexVat and Build Plate, thankfully with the assembled system you get both!
  • Chassis

    It’s our most up to date, always upgraded, always reliable chassis. Only pre-assembled by our experts. Our tried and true dual motor peel system is part of every 3D printer we sell. Now we’re including the latest Uber Z axis for ultimate strength and longevity. The adjustable internal chassis system allows for mounting of the large or standard FlexVat systems.

  • Electronics

    We have open source firmware to match our hardware. The electronics we use are still RAMPS 1.3-4 compatible and are the most popular design used today, even the newer single board controllers are RAMPS compatible. Add-ons and advanced control of external electronic devices are all but a few wires away. We even include a shutter assembly! With this printer you’ll be getting a Raspberry Pi 3, software setup is as simple as plugging into into your local PC network and discovering it using UPnP.


  • Specs

    -Build Area 175mm x 98.5mm x 250mm @40 microns with standard reservoir and build plate. Optional Large FlexVat and build plate sold separately or standard with the UltiPro Max. Large Build Plate size 190mm x 270mm, max build area with a single projector 152mm x 270mm x 250mm @ 70microns X/Y.

    Universal materials support, all resins supported and can be tuned in nanoDLP

    -X/Y Resolution Adjustable ~15micron-~75micron

    -3840 x 2160 pixel Optoma UHD60 Modified projector included. High output with extremely fast cure times. At high resolution you can expect layer cure times under 1 second.

    -Raspberry Pi 3 with nanoDLP preloaded included Printer. *RPi 3 not included in upgrade kit*

    -Wired network or Wifi 2.4GHz B/G/N supported. Network connection cable not included. 

    -120-240VAC 50-60Hz approx 300W power consumption.


The best things in life don’t cost a thing! Use nanoDLP to control your DLP printer without the need for a second monitor output on your home computer. It’s the ultimate way to keep your PC from turning into the dreaded dedicated 3D printer controller. You can use the feature rich nanoDLP to control any of our available DLP printers!

-Mask Support



-Dynamic Print Speed

-Blackout During Prints

-STL, SVG, SLC, and PNG Support

-Custom Buttons

-Easy Upgrades

-UPnP Network Discovery

-Even a Cloud Dashboard to remotely monitor your printers!

Since our printers use standard electronics we have minimal restrictions on software usage. You can use nanoDLP on a Raspberry Pi 3 as a free way to run your printer, or even Creation Workshop if you want it connected directly to your PC. With so many options, you’ll have a ton of capability just a fingertip away.

Our DLP printers support a massive array of 3D printing resins. If you find a resin that says it’s DLP printing compatible, chances are it’ll print on our printers. We supply 500mL of premium MakerJuice resin with each printer. This resin is stiff but flexible enough to allow for snap-fit plastic parts and is really a good choice for any 3D printed parts you might have. If you for some reason find it’s not a good fit you should head over to and check out their selection. Or you can check out some of the other resins in our store. Materials come in a huge range of offerings from rigid to flexible, castable and biocompatible, opaque to translucent, even clear. You’re sure to find exactly what you need.

All of our printers are documented and held on open, comment ready, public channels. We do our best to keep our documentation full of rich media with images and step-by-step instructions. If something’s missing just leave a comment and we’ll get it added right away!

With a dedicated support forum and direct email support, you’ll never be far from a helping hand. Our growing community is full of friendly helpful people, and we’re always there to help too! You’ll never find yourself stuck in a place we can’t help you get out of. It’s just part of what we do.